Upcycling a wooden pallet
Create your unique coffee table by upcycling a wooden pallet. A simple, yet innovative project that will leave you with a rustic and industrial-looking table. The ideal way to add a bit of charm to your living room; without costing a fortune!
Here's a list of equipment you’ll need:-
-
Drill and bit
-
A wooden pallet
-
Sandpaper (fine)
-
Screws
-
Castors
-
Don’t forget your Goggles!
Firstly - Clean the pallet
Before you start making your table it’s important that you lightly sand the wood first. Take time to remove any splintered rough edges and sand it gently for a smooth finish. You’ll want to retain the rustic look without the rough feel.
Secondly – drilling
Turn the pallet upside down to enable you to mark the holes for the wheels. You can use different-sized castors but you may want to choose larger ones, for a stronger, more industrial look.
Make small pilot holes and then drill the wheels into place. Use smaller screws so as not to drill right through the wood.
If you want to lift your coffee table higher, or even create an industrial-style desk, then why not add legs? Using table legs, measure each side in the same way as the castors. Draw around each table leg and don’t forget to include markings for the screws.
Thirdly - varnishing or colouring
Keeping your pallet table as rustic as possible means that you don’t even have to treat it. However, you may find that a light oil or varnish will seal it and highlight its natural look.
Or, you can create different effects depending on the look that you’re trying to achieve. Bright wood paints will give your room a pop of colour, or you can use gloss paint to give it a shine. Why not try our Valspar range to fit in with your current colour scheme?
Tip: Add coasters underneath the wheels to make sure that they don’t scratch or dent your floor.
So, for all your timber look no further than the team at Johnsons Timber Supplies. Get in touch with us on 0121 706 0404 or email sales@johnsonstimber.co.uk.